Motor Soft Starter with Bypass Inside for Industrial Applications

Xinkong Motor Soft Starter with Bypass Inside for Industrial Applications refers to a soft starter device that incorporates a bypass contactor directly within the unit. This design allows for seamless switching from the soft starter to full voltage operation once the motor reaches its steady-state condition. It is commonly used in industrial applications where a soft start is desired for reduced stress on the motor during startup, but bypassing the soft starter during normal operation can improve efficiency and reduce heat dissipation.

Send Inquiry

Product Description

Motor Soft Starter with Bypass Inside for Industrial Applications

- Multiple startup options available with soft starter technology

- Enhanced motor protection with the use of soft starter technology

- Ensures smooth operation of the motor with soft starter technology

- Energy-saving benefits achieved by utilizing soft starter technology

- Professional and reliable soft starter technology for motor control

- Optimal performance and longevity of motor equipment with soft starter technology

- Convenient and efficient motor startup with soft starter technology

- Ideal solution for air conditioner motors with a built-in bypass inside

Main Menu	Sub Menu	Parameter
A. S&P Para	A00.Curr Limit for CLS	10%~500%
	A01.Init Volt for VRS	30%~80%
	A02.Start Time for VRS	1~120s
	A03.Volt for Plus Start	30%~80%
	A04.Time for Plus Start	0~500ms
	A05.Curr Limit for CRS	10%~400%
	A06.Start Time for CRS	1~120s
	A07.Volt for Jog	30%~80%
	A08.Time for Soft Stop	1~10s
	A09.Start Mode	Volt Ramp Curr Limit Jog Curr Ramp Plus & Ramp C-Limit Ramp
	A10.Stop Mode	Free Stop Soft Stop
	A11.Control Mode	Forbid Key Board Terminal Ctrl Term & Key
	A12.Prog Relay Func	Non-Func Power On Standby Starting Bypass Stopping Running Fault
B.Protect	B00.Start OC Ratio	400%~600%
	B01.Running OC Ratio	200%~400%
	B02.Start OL Level	1~8
	B03.Running OL Level	1~8
	B04.Curr Unbalance Ratio	5%~85%
	B05.Over Volt Threshold	100%~140%
	B06.Under Volt Threshold	60%~100%
	B07.Under Load Threshold	0%~100%
	B08.Under Load Delay	0~200s
C.Run Para	C00.Starter Rated Curr	Factory Constant
	C01.Starter Rated Volt	Factory Constant
	C02.Motor Rated Curr	5A~Starter Rated Curr
	C03.Curr Cali Ratio	50~1500
	C04.Pulse Under Running	Pulse No Pulse
D. Misc	D00.MODBUS Addr	1~127
	D01.Baud Rate	19200 9600 4800 2400 1200
	D02.Volt Cali Ratio	5~200
	D04.Language	Chinese English Russian

Hot Tags: Motor Soft Starter with Bypass Inside for Industrial Applications, China, Manufacturers, Suppliers, Factory, Made in China, Quality, Advanced